This project portrays a methodology for taking after human arm development from alternate points of view ceaselessly progressively and repeating the development in a 3-D model of the human arm. The technique separates fundamental information of the development of the arm utilizing fitting sensors, for example, the ADXL335. At that point the information from the sensor is sustained into the PC 3-D model of the arm in Matlab through the Arduino Mega 2560 micro-controller. The 3-D model is developed using the Solidworks software. The information from the sensor is then utilized by the Matlab software to imagine and reproduce the continuous movement of the human arm into the 3-D model.